Δίσκος δισκοπρίονου Metabo 628659000 16 cm διάτρηση 2 cm 1 τεμ.

The Metabo 628659000 circular saw blade with a 16 cm diameter and 2 cm bore is designed for cutting chipboard, MDF and wood with accuracy. Manufactured for compatibility with a range of hobby and professional circular saws, the blade balances cutting performance and durability. Its tooth geometry and material choice enable clean crosscuts and rip cuts on engineered panels and solid timber, while the compact diameter offers control for portable machines and smaller saw tables.

Advantages

This circular saw blade provides precise cutting results and a fine finish on chipboard, MDF and wood. The compact 16 cm diameter supports controlled cutting depth and maneuverability on handheld saws or compact stationary saws. The 2 cm bore ensures secure mounting and stable rotation during operation. The blade's construction is aimed at wear resistance and consistent tooth sharpness to maintain cutting quality across repeated use.

Suitable for

• Crosscutting and ripping of chipboard panels
• Trimming and sizing MDF sheets
• General woodworking on soft and hardwoods
• Use with compact circular saws and small table saws

Key specifications

• Diameter: 160 mm
• Bore (arbor) diameter: 20 mm
• Material suitability: chipboard, MDF, wood
• Pack quantity: 1 piece

How to use

Install the blade onto the saw following the tool manufacturer's instructions, ensuring the correct orientation of the teeth for the intended cut direction and that the bore seats securely on the arbor. Tighten the blade fixing mechanism to the recommended torque and verify there is no lateral play. Adjust saw depth and fence to suit the workpiece thickness, and run a test cut on scrap material to confirm alignment and finish. Use steady feed rates appropriate to the material to avoid burning or chipping.

Recommendations

For best results, use a suitable blade guard and appropriate personal protective equipment. Match feed speed and blade speed to the material: slower feed for dense or laminated panels and moderate continuous feed for softwoods. Replace the blade when cutting quality degrades or when visible damage to teeth occurs.