DeLOCK Προσαρμογέας USB Type-C σε RS-232 D-Sub 9 ακίδων αρσενικό 2 m

The DeLOCK Adapter USB Type-C to RS-232 D-Sub 9 pin male with 2 m cable provides a reliable serial connection for devices with an RS-232 DB9 interface. It enables connection of printers, measurement instruments, controllers and IoT devices to hosts with a USB Type-C port. The adapter supports data transfer rates up to 0.45 Gbit/s and features a 256 B FIFO buffer for stable data flow. The product is supplied in black finish.

Advantages

This adapter offers plug-and-play connectivity between USB Type-C hosts and legacy RS-232 devices without the need to modify the serial device. With a 2 m cable length it provides flexible placement of connected equipment. The integrated FIFO buffer improves transmission reliability at typical serial data rates, and the compact D-Sub 9 male connector fits standard RS-232 ports.

Suitable for

• Connecting serial printers to modern computers and laptops
• Linking measurement instruments and laboratory equipment
• Connecting industrial controllers and PLCs with RS-232 interfaces
• Integrating legacy devices into IoT gateways and data loggers

Key specifications

• Connector: USB Type-C to RS-232 D-Sub 9 pin male
• Cable length: 2 m
• Maximum data transfer rate: up to 0.45 Gbit/s
• FIFO buffer: 256 B
• Colour: Black
• Brand: DELOCK, MPN: 64196, EAN: 4043619641963

How to use

Connect the D-Sub 9 male connector to the RS-232 port of the device and plug the USB Type-C connector into the host computer or USB-C hub. Install any required drivers on the host if the operating system does not provide native support for the adapter. After installation, configure the serial port settings (baud rate, parity, stop bits, flow control) in the host application to match the connected device.

Recommendations

For stable operation, keep cable runs away from strong electromagnetic interference sources and verify serial port settings match the peripheral device. Use the 2 m cable length to position equipment within a practical range and check driver availability for your operating system before deployment.