DeLOCK Power Adapter IEC 60320 - C14 σε C7 υποδοχή 2,5 A Μαύρο

The DeLOCK Power Adapter IEC 60320 - C14 to C7 Plug Socket 2.5 A Black is a compact power conversion accessory for connecting equipment with a C7 (figure-8) inlet to a standard IEC C14 power source. It provides a straight, space-saving connection that allows small audio/video devices, chargers and other electronics to be powered from an IEC inlet without changing the original device cable. The adapter is designed to support up to 2.5 A of current and comes in a black finish to match common power cords and equipment.

Advantages

This adapter delivers a simple and reliable electrical interface between a C14 mains output and a device with a C7 input. Its straight form factor minimizes strain on connected cables and is suitable for tight installation spaces. The rated current of 2.5 A is adequate for many low-power consumer electronics. Constructed with standard IEC 60320 connector geometry, the adapter is compatible with widely used mains power cords and rack or wall-mounted outlets.

Suitable for

• Small audio and video equipment with C7 (figure-8) power inlet
• Portable chargers and power supplies requiring a C7 connection
• Office or studio electronics that need a temporary or permanent C14-to-C7 connection
• Test benches and service areas where equipment with different inlet types are used

Key specifications

• Connector A: IEC 60320 C14 (male)
• Connector B: C7 plug socket (figure-8)
• Maximum current: 2.5 A
• Design: straight inline adapter
• Color: black
• Standard: IEC 60320 compliant connector geometry

How to use

Insert the IEC C14 end of the adapter into the C14 mains outlet or power extension. Plug the device's C7 connector into the adapter's C7 socket until it seats securely. Ensure the total current draw of the connected device does not exceed 2.5 A. Use the adapter only with compatible mains voltages and in dry, well-ventilated environments. Disconnect power before plugging or unplugging if possible to avoid arcing.

Recommendations

Check the device’s power rating before use to confirm the 2.5 A limit is sufficient. Avoid using the adapter with devices that require higher currents or that have sensitive grounding requirements. Inspect the connectors periodically for signs of wear or damage and replace the adapter if any deterioration is observed.