Λογαριασμός Επικοινωνία
Το καλάθι σας
Αποστολή με DPD & FedEx
Βοήθεια; Ρωτήστε το AI

Πολυλειτουργική κόλλα και σφραγιστικό Dekalin Dekasyl MS-2 6252012, μαύρη, 290 ml

Πολυλειτουργική κόλλα και σφραγιστικό Dekalin Dekasyl MS-2 6252012, μαύρη, 290 ml
Πολυλειτουργική κόλλα και σφραγιστικό Dekalin Dekasyl MS-2 6252012, μαύρη, 290 ml
28,84 €
PDF
PDF

Αποστολή & επιστροφές

Εκτιμώμενη παράδοση Πέμπτη, 26 Νοεμβρίου
Θα ενημερώνεστε μέσω του αναλυτικού μας συστήματος παρακολούθησης
Τρόποι πληρωμής
Τραπεζική κάρταVisaMastercardPayPalApple PayGoogle PayΤραπεζική κατάθεση

Κάντε μια ερώτηση – ο βοηθός AI απαντά αμέσως.

Περιγραφή

Dekasyl MS-2 is a multifunctional adhesive and sealant and is suitable for creating elastic connections between components where high adhesive strength is additionally required.

  • UV and ageing resistant
  • Neutral, odourless and fast curing

Dekasyl MS-2 from Dekalin (MPN 6252012) is a multifunctional adhesive and sealant. It is a good compromise between adhesive and sealant for demanding work. The elastic adhesive and sealant is suitable for creating elastic connections between components where high adhesive strength is additionally required. Application on glass, side skirts and wheel arch liners does not require prior surface treatment. Overpainting is possible after skin formation.

  • Application areas
  • Elastic connections and seals in caravan and motorhome construction
  • Bonding of roofs on buses, caravans and motorhomes
  • Bonding of edge profiles of trailers with aluminium or polyester
  • Bonding of polyester parts with metal frames
  • Bonding of floor systems
  • Sealing of weld seams
  • Properties
  • Free of solvents, isocyanate and PVC
  • Very good UV and ageing resistance

Generally good adhesion without primer on various substrates, e.g. Dekasyl MS-2 can be used as a sealant for PVC floor coverings

  • Permanently elastic in the temperature range from -40°C to +120°C

Can be overpainted after skin formation (wet on wet), this generally does not affect curing

Compatible with most industrial coating or painting systems, both alkyd resin and dispersion paints

  • Adhesion

In general, Dekasyl MS-2 adheres well without primer to clean, dry, dust- and grease-free substrates made of aluminium, stainless steel, galvanised steel, zinc, copper, brass, powder-coated metal, most painted metal surfaces, glass, PVC, polyester (GRP), painted and varnished wood, etc. No adhesion without pre-treatment on polyethylene, polypropylene and Teflon®. If high adhesion is required in cases of large thermal or physical loads, especially in humid environments, the use of a primer is recommended.

  • Processing

Dekasyl MS-2 can be easily processed with a hand or air pressure gun at temperatures from +5°C to +35°C. For sealing, Dekasyl MS-2 should be further processed or smoothed within 10 minutes (at 20°C/50% rel. humidity) with a spatula or putty knife previously dipped in mild soapy water. Avoid penetration of the soapy water between the joint sides and the sealant, as this leads to a loss of adhesion. For bonding, the substrates must be assembled within 15 minutes (at 20°C/50% rel. humidity) after applying Dekasyl MS-2. The higher the temperature, the shorter the processing time! In general, an adhesive layer of 2mm is recommended if similar materials (with similar strength) are to be bonded. The greater the difference in thermal expansion, the thicker the adhesive layer should be. At a temperature of 20°C and a relative humidity of 50%, Dekasyl MS-2 can be overpainted with most industrial paints after just 10 minutes. The best possible adhesion of paint layers is achieved when the paint is applied 4 hours after application of Dekasyl MS-2. Clean tools or remove uncured residues of Dekasyl MS-2 with a clean, colourless cloth soaked in acetone or MEK (it is recommended to check beforehand whether the surface is attacked by these cleaners).

  • 1x Dekalin Dekasyl MS-2, 290ml cartridge, black

Χαρακτηριστικά

Χαρακτηριστικά
EAN
4046085625208
MPN
6252012
Αντοχή στη θερμοκρασία
-40°C to +120°C
Γρήγορο στέγνωμα
Fast curing
Κατάλληλο για γυαλί
Ναι
Κατάλληλο για ξύλο
Painted and lacquered wood
Κατάλληλο για πλαστικό
PVC, Polyester (GRP)
Κατηγορία
Κόλλες γενικής χρήσης
Μάρκα
Dekalin
Μοντέλο
6252012
Τεχνικά χαρακτηριστικά
Solvent-, isocyanate- and PVC-free
Τύπος προϊόντος
Adhesive and sealant
Υλικό βάσης
MS Polymer
Χρώμα προϊόντος
Μαύρο
Χωρητικότητα
290 ml
Ιστορικό τιμών τους τελευταίους 6 μήνες
Πολυλειτουργική κόλλα και σφραγιστικό Dekalin Dekasyl MS-2 6252012, μαύρη, 290 ml
Τρέχουσα
28,84 €
Χαμηλότερη 7 ημ.
28,84 €
Υψηλότερη 7 ημ.
28,84 €
Μεταβολή 24 ωρών
0,00 €   0%
Μεταβολή 7 ημ.
—   
Μεταβολή 30 ημ.
—   

Γράψτε μια αξιολόγηση

Βαθμολογία *
Το όνομά σας θα εμφανίζεται δημόσια – μπορείτε να χρησιμοποιήσετε ψευδώνυμο. Προσκαλούμε τους αγοραστές να γράφουν αξιολογήσεις. Τις ελέγχουμε πριν από τη δημοσίευση και δημοσιεύουμε επίσης τις αρνητικές.

Περισσότερα προϊόντα DEKALIN σε αυτή την κατηγορία

9

Δημοφιλή προϊόντα σε αυτή την κατηγορία

4
Πωλητής: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Βίλνιους, Λιθουανία · Κωδικός εταιρείας 303192950 · ΑΦΜ/ΦΠΑ ΕΕ LT100008198612 · Αποστολή από την ΕΕ (Λιθουανία)
WhatsApp
Messenger
Γεια σας, είμαι ο βοηθός AI του DistriNode. Μπορώ να σας βοηθήσω να βρείτε προϊόντα, να συγκρίνετε επιλογές, να δημιουργήσετε PDF προσφορών ή να ανοίξετε αιτήματα υποστήριξης.
Όλες οι κατηγορίες