DANFOSS DEVI 140F1763 DEVImat 150 Σετ θερμαντικών πλεγμάτων λεπτής στρώσης, 150W/m², 10m², 0,5 x 20m

Uneven floor heating and cold spots in tiled or stone floors can make rooms uncomfortable, especially in bathrooms and kitchens. The DEVImat 150 thin-bed heating mat set provides a reliable solution for warming floors efficiently. This set covers 10 square meters with a 0.5-meter-wide mat that is 20 meters long, delivering 150 watts per square meter for a total output of 1500 watts at 230 volts. The twin conductor heating cable is thin, with a diameter of approximately 4 mm, and the mat features a self-adhesive backing for straightforward installation in thin-bed applications. It is suitable for indoor use under tiles, natural stone, laminate, and wood floors when an appropriate subfloor is used. A 2.5-meter cold lead is included for connection, and an external thermostat is required for temperature control.

Who is it for

This heating mat is intended for homeowners, electricians, and contractors installing electric underfloor heating in new builds or renovations. It is particularly suited for rooms where floor height build-up must be kept minimal, such as bathrooms, kitchens, and living areas with tile or stone finishes.

Main features

• Thin-bed heating mat with self-adhesive backing for easy positioning
• 150 W/m² output over 10 m², total 1500 W at 230 V
• Twin conductor cable design for reduced electromagnetic fields
• Mat dimensions: 0.5 m width × 20 m length, cable diameter approx. 4 mm
• 2.5 m cold lead for connection to thermostat (not included)
• Suitable for tiles, natural stone, laminate, and wood floors with proper subfloor

Specifications

• Product type: Electric underfloor heating mat
• Heated area: 10 m²
• Power output: 150 W/m², total 1500 W
• Supply voltage: 230 V AC
• Mat width: 0.5 m
• Mat length: 20 m
• Heating cable type: Twin conductor
• Cable diameter: Approx. 4 mm
• Cold lead length: 2.5 m
• Installation method: Thin-bed
• Self-adhesive backing: Yes
• Thermostat included: No

Tips

Ensure the subfloor is clean, dry, and level before installation. Use a suitable primer if needed, and always test the heating cable resistance before and after embedding in adhesive. Connect to a dedicated thermostat for optimal control and energy efficiency.