CPU Cooler PCCOOLER GI-X3 V2 120 mm fan 1000 RPM

The PCCOOLER GI-X3 V2 120 mm fan 1000 RPM is a tower-style CPU cooler designed for standard desktop systems. It combines a single 120 mm fan with a compact heatsink to provide steady airflow and heat dissipation for mainstream processors. The cooler targets users who prioritize low acoustic output and reliable thermal performance for everyday computing and light gaming.

Advantages

The design emphasizes low noise via a 120 mm fan that operates at a rated 1000 RPM, delivering smooth airflow while keeping acoustic levels minimal. The compact heatsink and compatible mounting system allow installation in many mid-tower and compact cases without requiring excessive clearance. Materials and fan bearing selection are chosen to ensure consistent performance and long-term operation under typical desktop workloads.

Suitable for

• Office and home desktop PCs with standard CPU sockets
• Compact and mid-tower systems where low-noise cooling is desired
• Light gaming rigs and multimedia workstations with moderate thermal loads
• Upgrades from stock coolers to achieve quieter operation

Key specifications

• Fan size: 120 mm
• Rated fan speed: 1000 RPM
• Cooling format: single-fan tower heatsink
• Airflow orientation: case-compatible push/pull arrangement for CPU cooling
• Noise-optimized operation for low acoustic output
• Compatibility: fits mainstream ATX and micro-ATX setups with standard CPU socket layouts

How to use

Mount the cooler following the supplied instructions for your motherboard socket type. Ensure the backplate and mounting brackets are securely fastened and that thermal paste is applied evenly between the CPU heatspreader and the heatsink base. Install the 120 mm fan in the intended airflow direction and connect its power cable to the CPU_FAN header on the motherboard for automatic speed control. Verify clearances with memory modules and case panels before completing installation.

Recommendations

For optimal performance, position the cooler to align with the case airflow: intake fans at the front and exhaust fans at the rear/top. Regularly check and clean dust from the fan blades and heatsink fins to maintain airflow. If using the cooler in a compact chassis, confirm there is sufficient clearance above RAM modules and that the fan does not obstruct other components.