CoreParts MMKN078-16GB Μονάδα μνήμης 1 x 16 GB DDR4 288-Pin-DIMM

The CoreParts MMKN078-16GB is a single 16 GB DDR4 memory module with a clock speed of 2666 MHz. Intended for use in desktop PCs and servers, this module uses standard DDR4 technology and is compatible with systems that support 2666 MHz memory. The module is supplied in green and provides a straightforward upgrade path for systems requiring additional RAM capacity.

Advantages

This 16 GB CoreParts DDR4 module delivers reliable performance at 2666 MHz and is built with original chip sets from certified suppliers to match the performance of factory-installed memory. The single-module configuration simplifies upgrades and can improve multitasking and overall system responsiveness without requiring complex installation steps.

Suitable for

• Upgrading desktop PCs to increase available RAM
• Adding memory to entry-level servers that accept DDR4 2666 MHz modules
• Replacing a faulty or smaller memory module in compatible systems

Key specifications

• Brand: CoreParts
• Model: MMKN078-16GB
• Capacity: 16 GB
• Type: DDR4
• Clock speed: 2666 MHz
• Color: Green
• Weight: 0.01 kg
• EAN: 5706998875631

How to use

Power off the computer and disconnect it from the mains before installing the memory module. Open the case, locate an available DDR4 DIMM slot compatible with 2666 MHz modules, and align the notch on the module with the slot. Firmly press the module into the slot until the retaining clips lock into place. Close the case, reconnect power, and start the system. Verify the new memory is recognised in the operating system or BIOS/UEFI.

Recommendations

Install modules in matching pairs where possible for dual-channel operation, and consult the motherboard manual to confirm supported memory configurations and maximum capacities. Handle the module by the edges and avoid touching contacts to prevent damage from static electricity.