Bosch Easy Impact 600 600 W 3000 RPM Keyless

The Bosch Easy Impact 600 is an electric impact drill powered by a 600 W motor and designed for a range of drilling tasks in wood, metal and masonry. With a maximum no-load speed of 3000 RPM and an impact rate up to 45,000 bpm, it combines rotary drilling and percussive action to speed up work in tougher materials. The tool features a keyless chuck for quick bit changes and a compact, lightweight design at 1.7 kg that supports extended use and easier handling on ladders or overhead jobs.

Advantages

Compact dimensions and low weight make the drill easy to control and transport, while the 600 W motor delivers sufficient power for most DIY and light professional applications. The keyless chuck simplifies switching between drill and screwdriver bits without extra tools. A high no-load speed and a strong impact rate improve performance when drilling into concrete or masonry, and the balanced design helps reduce user fatigue during longer tasks.

Suitable for

• Drilling holes in wood up to 25 mm diameter
• Drilling steel and metal up to 10 mm diameter
• Light chiselling and drilling in concrete and masonry up to 12 mm diameter
• Screwdriving and furniture assembly
• Home improvement, renovation and general DIY tasks

Key specifications

• Motor power: 600 W
• Maximum no-load speed: 3000 RPM
• Impact rate: up to 45,000 bpm
• Maximum drilling diameter in wood: 25 mm
• Maximum drilling diameter in steel: 10 mm
• Maximum drilling diameter in concrete/masonry: approximately 12 mm
• Chuck type: keyless
• Power source: AC (mains)
• Weight: 1.7 kg
• Product colour: green and black

How to use

Choose an appropriate drill bit for the material and insert it into the keyless chuck, then tighten by hand until secure. Connect the drill to an appropriate mains supply and set the rotary/impact mode depending on the task: use impact mode for masonry and concrete and rotary mode for wood and metal. Start drilling at low speed to establish the hole, then increase speed as needed. Apply steady, even pressure and avoid forcing the tool; let the motor and impact action do the work. For screwdriving, use a suitable screwdriver bit and control torque and speed to avoid overdriving screws.

Recommendations

Use appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling. Secure workpieces with clamps where possible. For prolonged drilling in masonry, periodically withdraw the bit to remove dust and allow the bit to cool. Follow manufacturer guidance for duty cycle to prevent motor overheating and inspect bits regularly for wear.