Bosch 2 608 600 549 Εξάρτημα γωνιακού τροχού Δίσκος κοπής

The Bosch 2 608 600 549 angle grinder accessory is a thin cutting disc with a diameter of 125 mm and a thickness of 1 mm, designed for use with hand-held angle grinders. The black disc is supplied as a single piece and is intended for precise, fast cutting and grinding tasks while maintaining durability and compatibility with various Bosch angle grinders.

Advantages

The thin Rapido disc enables fast and clean cutting with low exertion of force, delivering accurate results with reduced noise and dust. Its design minimises burr formation and prevents blue discolouration on cut edges. The disc meets Fe/S/Cl limits of < 0.1% and supports a maximum circumferential speed of 80 m/s depending on rpm and disc diameter.

Suitable for

• Precise cutting of metal components
• Fast separation tasks on thin materials
• Tasks requiring minimal burr and heat-affected zones
• Use with hand-held Bosch angle grinders

Key specifications

• Diameter: 125 mm
• Thickness: 1 mm
• Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter)
• Fe/S/Cl < 0.1%
• Quantity: 1 piece
• Brand: Bosch
• MPN: 2608600549
• EAN: 3165140219624

How to use

Install the disc on a compatible hand-held angle grinder following the tool manufacturer's mounting instructions and safety guards. Use appropriate personal protective equipment such as eye protection, gloves and hearing protection. Operate the grinder at speeds within the disc's rated limits and apply light, steady pressure while cutting to achieve clean and accurate results. Avoid side loading the disc and allow it to cool between long cuts.

Recommendations

Store the disc in a dry, cool place and inspect for cracks or damage before each use. Replace the disc if any damage is found. Select the correct disc for the material and ensure the grinder's rpm does not exceed the disc's rated maximum circumferential speed.