Λογαριασμός Επικοινωνία
Το καλάθι σας
Αποστολή με DPD & FedEx
Βοήθεια; Ρωτήστε το AI

BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC

BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
27,19 €
The BlueOptics SFP3132BU5MK InfiniBand fibre optic cable is a 5 m single-mode patch cord with duplex LC/UPC to SC/UPC connectors. It uses G.657.A1 single-mode fibre (9 µm core) in a yellow LSZH jacket and supports full duplex transmission for 1310 nm and 1550 nm signals. The cable is intended for re... Περισσότερα
Απόθεμα 100 Κωδικός 1492965 Μάρκα BLUEOPTICS Μοντέλο SFP3132BU5MK Εγγύηση 2 χρόνια

Αποστολή & επιστροφές

Εκτιμώμενη παράδοση Τρίτη, Νοεμβρίου 3
Θα ενημερώνεστε μέσω του αναλυτικού μας συστήματος παρακολούθησης
Τρόποι πληρωμής
Τραπεζική κάρταVisaMastercardPayPalApple PayGoogle PayΤραπεζική κατάθεση

The BlueOptics SFP3132BU5MK InfiniBand fibre optic cable is a 5 m single-mode patch cord with duplex LC/UPC to SC/UPC connectors. It uses G.657.A1 single-mode fibre (9 µm core) in a yellow LSZH jacket and supports full duplex transmission for 1310 nm and 1550 nm signals. The cable is intended for reliable fiber connections between patch panels, optical transceivers and other network components where single-mode performance and low-loss links are required.

Advantages

The cable provides low attenuation (typical 0.4 dB/km) and low insertion loss, with optimized return loss achievable through connector polish options. High-quality branded fibers and precision connectors with zirconia ceramic ferrules are used to ensure stable optical performance and long mechanical lifetime. The LSZH jacket reduces smoke and eliminates halogen emissions in the event of fire, and the assembly is tested by interferometer and OTDR with a measurement protocol supplied with each unit.

Suitable for

Key specifications

How to use

Ensure both endpoints and transceivers are powered down or in a safe maintenance state before connecting. Remove protective caps from the LC and SC connectors, align the connectors with their respective ports and insert until a positive latching click is felt on the LC end and the SC locks in place. Route the fibre cable without tight bends and avoid compressive forces; maintain the manufacturer’s minimum bend radius for G.657.A1 fiber. After installation, power up the equipment and verify link integrity and optical loss using appropriate test equipment or by checking device link status.

Recommendations

Store connectors with protective caps when not in use and clean endfaces before mating to avoid contamination and increased insertion loss. For permanent or outdoor installations, verify environmental suitability and secure the cable to avoid stress. Use the supplied measurement protocol to document insertion loss and return loss values for record-keeping and troubleshooting.

Κύρια σημεία
  • Connecting optical transceivers (InfiniBand, SFP, SFP+) to patch panels or devices
  • Point-to-point single-mode links in data centers and server rooms
  • High-speed, low-latency storage and HPC interconnects using InfiniBand
  • Telecommunications and optical backbone connections requiring 1310/1550 nm operation
  • Length: 5 m
  • Connector A: Duplex LC/UPC
  • Connector B: SC/UPC
  • Fibre type: Single‑mode G.657.A1 (9 µm core)
  • Operating wavelengths: 1310 nm / 1550 nm
  • Typical attenuation: 0.4 dB/km
  • Jacket material: LSZH (low smoke, zero halogen)
  • Duplex/full duplex configuration
  • Tested with interferometer and OTDR; measurement protocol included
Χαρακτηριστικά
Full duplex
Yes
Βάρος
0.04 kg
Βάρος συσκευασίας
50 g
Βύσμα 1
LC
Βύσμα 2
SC
Δεν περιέχει
Halogen
Διάμετρος επένδυσης
125 µm
Διάμετρος καλωδίου
2 mm
Διάμετρος πυρήνα
9 µm
Δομή λειτουργίας ίνας
Single-mode
Μήκος καλωδίου
5 m
Πιστοποίηση
IEC-61034,IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950
Πιστοποιητικά συμμόρφωσης
RoHS
Ποσότητα ανά συσκευασία
1 pc(s)
Τύπος οπτικής ίνας
G.657.A1
Τύπος στίλβωσης βύσματος
UPC
Υλικό βύσματος
Ceramic
Υλικό μανδύα
Low smoke zero halogen (LSZH)
Υποστηριζόμενα μήκη κύματος
1550, 1310
Φύλο βύσματος 1
Male
Φύλο βύσματος 2
Male
Χρώμα προϊόντος
Yellow
Ιστορικό τιμών τους τελευταίους 6 μήνες
BlueOptics SFP3132BU5MK InfiniBand καλώδιο οπτικών ινών 5 m LC SC
Τρέχουσα
27,19 €
Χαμηλότερη
26,55 €
Υψηλότερη
39,00 €
Μεταβολή 24 ωρών
-0,73 €   -3%
Εβδομάδα
-0,43 €   -2%
Μήνας
+0,36 €   +1%

Δημοφιλή προϊόντα σε αυτή την κατηγορία

Πωλητής: UAB KUR LT · Laisvės pr. 125A, LT-06118 Βίλνιους, Λιθουανία · Κωδικός εταιρείας 303192950 · ΑΦΜ/ΦΠΑ ΕΕ LT100008198612 · Αποστολή από την ΕΕ (Λιθουανία)
Γεια σας, είμαι ο βοηθός AI του DistriNode. Μπορώ να σας βοηθήσω να βρείτε προϊόντα, να συγκρίνετε επιλογές, να δημιουργήσετε PDF προσφορών ή να ανοίξετε αιτήματα υποστήριξης.