Αντάπτορας WiFi USB Comfast CF-WU815N 150Mbps 2,4GHz Plug&Play USB WLAN Dongle

The Comfast CF-WU815N is a compact USB WiFi adapter that provides wireless network connectivity at up to 150 Mbps on the 2.4 GHz band. This Plug&Play dongle includes an internal wireless driver and is designed to add or restore WiFi access on desktops, laptops and other devices that lack built-in wireless, with a low-profile housing that leaves only 6.5 mm exposed from the USB port.

Advantages

The adapter supports automatic installation via Plug&Play while also allowing manual driver update when an Internet connection is required. Its mini, portable design integrates closely with a laptop or desktop. The device supports Access Point (AP) mode to provide WiFi for mobile phones or tablets. Built-in antenna and USB 2.0 interface simplify setup and use.

Suitable for

• Adding WiFi to desktops or laptops without wireless capability
• Replacing a faulty internal WiFi module
• Temporary or travel use when a compact external adapter is needed
• Providing a simple wireless hotspot (AP mode) for phones or tablets

Key specifications

• Model: Comfast CF-WU815N
• Wireless standard: IEEE 802.11b/g/n
• Frequency: 2.4 GHz (2.412–2.484 GHz)
• Maximum throughput: 150 Mbps (802.11n)
• Transmission power: 18 dBm
• Supported rates: 11b: 1/2/5.5/11 Mbps; 11g: 6/9/12/18/24/36/48/54 Mbps; 11n: 150 Mbps
• Encryption: WEP, WPA / WPA2, WPA-PSK / WPA2-PSK
• Interface: USB 2.0
• Antenna: built-in 2 dBi
• Dimensions: 20 × 15 × 6 mm (6.5 mm exposed from USB port)
• Color: white
• Supported OS: Windows 10 (32/64 bit), 8.1, 8, 7, XP
• Package contents: WiFi adapter, manual
• Warranty: 24 months

How to use

Insert the Comfast CF-WU815N into an available USB port. The adapter will attempt Plug&Play installation using the internal driver; if automatic installation does not complete, follow the manual driver installation instructions included in the user manual. After installation, select the desired 2.4 GHz wireless network from your operating system’s WiFi list and enter the network password using supported encryption (WEP/WPA/WPA2 or WPA-PSK/WPA2-PSK). To enable AP mode, configure the adapter as an access point in the provided driver or utility according to the manual.

Recommendations

For best performance, use the adapter with devices located within typical indoor 2.4 GHz range and avoid physical obstructions and sources of interference (microwaves, cordless phones). Ensure your Windows system is updated and install any required drivers from the included manual if Plug&Play does not complete. This adapter is intended for general browsing, streaming and light online tasks rather than high-bandwidth enterprise use.