Αντάπτορας SATA σε mSATA DeLOCK 64100

The DeLOCK SATA to mSATA Adapter 64100 allows installation of a full-size mSATA SSD into a system via an internal SATA 22‑pin interface. The compact adapter is intended for easy mounting inside a desktop or compatible enclosure and is supplied in a box package for storage and transport.

Advantages

The adapter provides a straightforward solution to connect an mSATA SSD to a standard SATA interface using a male SATA 22‑pin connector. Its compact dimensions (51 mm × 80 mm × 5 mm) make it suitable for limited-space installations. It is compatible as an accessory with the Delock docking and clone station 64098, enabling use and cloning of mSATA drives.

Suitable for

• Installing a full-size mSATA SSD into a system with a SATA 22‑pin internal connector
• Using mSATA drives with the Delock docking and clone station 64098
• Upgrading storage in desktops or systems with available SATA internal ports

Key specifications

• Brand: DELOCK
• Model / MPN: 64100
• EAN: 4043619641000
• Interface: SATA 22‑pin (male) to mSATA
• Dimensions: 51 mm (W) × 80 mm (D) × 5 mm (H)
• Package: Box

How to use

Place the mSATA SSD into the adapter slot and secure it according to the drive and adapter mounting method. Insert the adapter's male SATA 22‑pin connector into an available internal SATA port on the motherboard or compatible host device. Ensure the system is powered off before installation and that the drive is properly recognized in the BIOS/UEFI or operating system after boot.

Recommendations

Install or remove the adapter only when the computer is powered off and unplugged. For cloning operations, use the Delock docking and clone station 64098 as specified by the manufacturer to ensure correct drive detection and cloning procedures.