Ανεμιστήρας Flashforge GUIDER3 PLUS Ultra 8015 (MPN 30002250001) για ψύξη εκτυπωτή 3D

The Fan Flashforge GUIDER3 PLUS Ultra 8015 is a replacement cooling fan intended for use in compatible Flashforge GUIDER3 PLUS Ultra 3D printers. It provides directed airflow to the print area and internal electronics to help maintain stable printing temperatures, reduce filament oozing and stringing, and protect heat-sensitive components. The fan is designed for service, repair, or upgrade tasks where restoring or improving cooling performance is required.

Advantages

This replacement fan offers consistent airflow and steady rotational speed suitable for layer cooling and enclosure ventilation. Its compact form factor matches the space constraints of the GUIDER3 PLUS Ultra assembly, enabling straightforward installation without major modifications. The fan contributes to improved print surface quality by cooling newly extruded material more predictably and reduces the risk of thermal stress on nearby electronics.

Suitable for

• Replacing a failed or noisy part cooling or internal ventilation fan in a GUIDER3 PLUS Ultra unit
• Service and maintenance tasks to restore proper cooling performance
• Upgrades to recover original airflow characteristics after long-term use

Key specifications

• Form factor: 80 x 80 x 15 mm frame size for compact printer mounting
• Function: axial cooling fan for directed airflow to print area and electronics
• Typical application: part cooling and internal ventilation in enclosed 3D printer chassis
• Connector type: standard fan power connector compatible with GUIDER3 PLUS Ultra wiring harness
• Operating environment: designed for continuous duty within typical printer enclosure temperatures

How to use

Power down the printer and disconnect it from the mains before starting work. Access the fan location by following the GUIDER3 PLUS Ultra service instructions to remove the relevant cover panels. Unplug the existing fan connector, remove any mounting screws or clips, and install the replacement fan in the original orientation to preserve airflow direction. Secure the fan with the original fasteners, reconnect the power connector, replace the covers, and test the unit by powering on and monitoring fan operation and print cooling performance.

Recommendations

Ensure the fan blades and housing remain free of dust and filament debris; perform periodic visual inspections and clean with compressed air while the unit is powered off. If the fan produces unusual noise or vibration after installation, verify mounting screws are tight and the connector is fully seated. Replace the fan if bearing noise or reduced airflow is observed to maintain print quality and component cooling.