Αεροσυμπιεστής EINHELL TE-AC 430/50/10 — 3.000 W, 50 L, σταθερός, μαύρο

EINHELL TE-AC 430/50/10 is a stationary workshop air compressor with a 50‑liter receiver and a 3,000 W drive motor. The unit features an oil‑lubricated pump design for stable operation and improved durability. Engineered for continuous air delivery, it supports a range of pneumatic tasks from tyre inflation to powering air tools and spray painting in both DIY and professional workshop environments.

Advantages

The oil‑lubricated pump ensures steady cooling and reduced wear for extended service life, while the 50 L tank provides a buffer for longer tool run times and more consistent pressure. The 3,000 W motor delivers sufficient power for medium‑duty pneumatic applications. Built as a stationary workshop compressor, it offers stable installation and reliable air supply for multiple tools and repeated cycles.

Suitable for

• Inflating car, bicycle and motorcycle tyres
• Operating pneumatic impact wrenches and ratchets
• Using airbrushes and spray guns for paint and coatings
• Running staplers, nailers and air hammers in a workshop
• Blowing dust and debris from work surfaces and machinery

Key specifications

• Tank capacity: 50 litres
• Motor power: 3,000 watts
• Pump type: oil‑lubricated compressor pump
• Design: stationary workshop unit
• Continuous air delivery suitable for extended operation

How to use

Install the compressor on a stable, level surface in a well‑ventilated area and connect it to an appropriate power supply following local electrical regulations. Fill and maintain oil in the pump according to the manufacturer’s service intervals. Adjust the outlet pressure using the built‑in regulator to match the requirements of the connected pneumatic tool. Monitor the pressure gauges while operating and allow the tank to reach the set cut‑out pressure before using tools for consistent performance. Drain condensate from the tank regularly to prevent corrosion and maintain air quality.

Recommendations

Use recommended compressor oil and follow scheduled maintenance for the oil‑lubricated pump. Match hose diameter and fittings to the required airflow of your tools to minimise pressure drop. For paint spraying, ensure proper filtration and use a moisture separator to improve finish quality.