ACT Καλώδιο τροφοδοσίας βύσμα CEE 7/7 (γωνιακό) - C15 μαύρο 2 m

The ACT Powercord mains connector CEE 7/7 male angled C15 black 2 m is a 2-metre power cable combining a CEE 7/7 angled mains plug and an IEC C15 coupler. It is rated for 250 V and 10 A and is built to provide a secure, low-profile connection for equipment that requires the C15 inlet. The cable's black outer jacket and angled plug make it suitable for installations where space behind the device is limited and where a heat-resistant C15 connection is preferred.

Advantages

This ACT powercord offers a compact angled CEE 7/7 mains plug to reduce rear clearance and an IEC C15 coupler compatible with appliances that have a C15 inlet. With a 2 m length it provides flexibility in rack or desktop setups while maintaining a 10 A, 250 V rating for standard mains-powered IT and heating-capable equipment. The black PVC jacket provides basic mechanical protection and standard insulation suitable for general installation and service environments.

Suitable for

• Network switches and servers with C15 inlets
• Heat-generating appliances that accept C15 connectors
• IT racks or wall-mounted equipment with limited rear clearance
• Desktop devices requiring a 2 m connection to a nearby outlet

Key specifications

• Input voltage: 250 V
• Rated current: 10 A
• Connector 1: CEE 7/7 angled male
• Connector 2: IEC C15 coupler
• Cable length: 2 m
• Colour: Black

How to use

Insert the angled CEE 7/7 mains plug into a compatible wall outlet or power strip, ensuring the plug is fully seated. Connect the IEC C15 coupler to the device's C15 inlet, observing correct orientation for a secure fit. Route the cable to avoid tight bends and keep it away from direct heat sources or sharp edges. Verify the device and outlet meet the cable's 250 V / 10 A rating before applying power.

Recommendations

Use this powercord with equipment that explicitly accepts an IEC C15 inlet, particularly devices that generate heat. Avoid using the cable beyond the specified voltage and current ratings. For installations in confined spaces, the angled CEE 7/7 plug helps reduce clearance; ensure the cable is not stressed at the connector joints and inspect periodically for wear.