ACT Καλώδιο τροφοδοσίας CEE 7/7 βύσμα (γωνιακό) - C5 μαύρο 7 m

The ACT Powercord CEE 7/7 male angled to C5 black 7 m is a mains cable engineered for delivering mains power to equipment with a C5 inlet. This 7 metre H05VV-F type cable combines a grounded CEE 7/7 angled plug with a C5 coupler, providing a flexible and durable connection for devices that require 230 V and up to 2.5 A. The cable jacket in black and the right-angled plug end help route the cord neatly in confined spaces while keeping reliable electrical contact.

Advantages

This power cord offers a long reach of 7 metres enabling placement flexibility for equipment. The angled CEE 7/7 plug reduces stress on the connection and on wall outlets in tight installations. Constructed with H05VV-F cable type, the cord maintains flexibility at room temperature and resists everyday wear. The C5 coupler provides secure three-pin grounding suited to compatible laptops, projectors and other small appliances.

Suitable for

• Powering laptops and notebook power bricks with a C5 inlet
• Supplying projectors and small AV equipment
• Office workstations and home electronics where a longer reach is required
• Installations requiring an angled mains plug to save space behind furniture

Key specifications

• Connector 1: CEE 7/7 angled male plug
• Connector 2: C5 coupler (female)
• Cable length: 7 m
• Cable type: H05VV-F (flexible PVC insulated cable)
• Rated voltage: 230 V
• Rated current: 2.5 A
• Colour: Black

How to use

Inspect the cable and connectors for visible damage before first use. Insert the angled CEE 7/7 plug into a compatible mains outlet ensuring correct orientation and secure seating. Connect the C5 coupler to the device's inlet until it clicks or feels firmly seated. Do not force connections; if resistance is felt, remove and check alignment. Disconnect by pulling the plug bodies rather than the cable. Store the cable coiled without sharp bends when not in use.

Recommendations

Use this cable indoors and avoid exposure to moisture, direct sunlight or excessive heat. Do not exceed the rated 2.5 A load. For permanent or hardwired installations, consult a qualified electrician. Replace the cable if insulation or connectors are damaged.