Τρυπάνι SDS plus Bosch 5X 15x400x460 mm — 2608833824

SDS plus hammer drill bit Bosch 5X, diameter 15 mm with a usable length of 400 mm and overall length of 460 mm, is designed for drilling deep holes in concrete, masonry and natural stone with SDS plus rotary hammer drills. The bit features a robust design aimed at maintaining drilling speed and accuracy during extended operation and is suitable for both professional tradespeople and serious DIY users who need reliable hammer drilling performance.

Advantages

The Bosch 5X SDS plus bit provides consistent drilling progress and long service life due to wear-resistant cutting edges and optimized geometry. Its 15 mm diameter and extended usable length enable deep, straight holes while the SDS plus shank ensures secure tool-to-bit engagement and quick bit changes. The bit construction minimizes vibration transfer and allows efficient dust and debris removal from the hole.

Suitable for

• Drilling through reinforced and non-reinforced concrete
• Creating anchor and dowel holes for fixings
• Drilling in masonry, brick and natural stone
• Tasks requiring deep holes such as plumbing, electrical conduit and installation work

Key specifications

• Drill diameter: 15 mm
• Usable length (working length): 400 mm
• Overall length: 460 mm
• Shank type: SDS plus
• Application: hammer drilling in concrete, masonry and stone

How to use

Insert the SDS plus shank into the rotary hammer’s chuck until it locks, ensuring proper fit before starting the tool. Select hammer mode and apply steady forward pressure without forcing the bit; allow the tool’s percussion action to do the work. For deep holes, periodically withdraw the bit to clear dust and improve cooling. Use appropriate personal protective equipment, including eye protection, dust mask and hearing protection when operating the rotary hammer.

Recommendations

For best results, use the bit in SDS plus rotary hammers rated for the intended drilling diameter and depth. When encountering reinforcement, proceed with controlled pressure and, if necessary, use a rebar-cutting accessory or switch to a dedicated rebar-cutting bit. Clean and inspect the bit after use and store it in a dry place to maintain performance.