Τρυπάνι Bosch SDS plus-9 RebarCutter 300 mm 2608586996

The Bosch SDS plus-9 RebarCutter Drill Bit (300 mm, MPN 2608586996) is engineered for drilling in reinforced concrete with embedded rebar. Its fixed carbide teeth and steep 2+2 flute geometry are designed to cut through rebar while maintaining drilling speed and tool life. The bit includes a ventilation hole for heat dissipation and metal chip evacuation. It fits rotary hammers with SDS plus holders and is intended for rotary-only use without impact.

Advantages

Firmly mounted carbide teeth and a specialised tip shape increase wear resistance and maintain cutting performance. The 2+2 flute design promotes efficient dust and chip removal and reduces vibration for improved power transfer and drilling speed. The ventilation hole limits overheating and aids in clearing metal chips from the cutting area. Compatibility with SDS plus holders ensures easy mounting on a wide range of rotary hammers.

Suitable for

• Drilling holes through reinforced concrete containing rebar (with prior structural approval where required)
• Construction and renovation tasks requiring durable drill bits
• Applications needing clean, precise holes in concrete with embedded metal

Key specifications

• Brand: Bosch
• Model / MPN: 2608586996
• Type: SDS plus RebarCutter drill bit
• Length: 300 mm
• Shank: SDS plus (for SDS plus rotary hammers)
• Use mode: rotary only (do not use with impact)
• EAN: 3165140576697

How to use

Insert the SDS plus shank securely into the rotary hammer's chuck. Use the drill in rotary mode only; do not engage the hammer/impact setting. Align the bit with the desired drilling location and start at low speed to establish the hole, then increase speed as appropriate. Apply steady, moderate pressure and allow the bit's carbide teeth and flute geometry to remove material. Periodically withdraw the bit to clear chips and check for overheating.

Recommendations

Do not cut through rebar unless you have written approval from a structural engineer. Use appropriate personal protective equipment (eye protection, hearing protection, gloves) and follow the rotary hammer manufacturer's safety instructions. If excessive vibration, damage, or unusual wear appears, stop and inspect the bit.