Τροφοδοτικό PC AEROCOOL AEROB750 750W 80 PLUS Bronze Non-Modular 230V Silent μαύρο

The AEROCOOL AEROB750 750W 80 PLUS Bronze Non-Modular 230V Silent Black is an internal power supply unit designed to deliver stable 750 W output for desktop PCs. It features 80 PLUS Bronze efficiency, a 120 mm quiet cooling fan, and a non-modular cable layout with flat black cables. The unit includes active power factor correction (APFC), premium 105°C Japanese capacitors, high-end solid state capacitors, and DC-to-DC conversion circuitry to ensure tight voltage regulation and improved efficiency under varying loads.

Advantages

The power supply offers up to 90%+ efficiency under 230V EU Bronze conditions, reducing wasted energy and heat compared with lower-efficiency models. Built-in APFC improves voltage stability and lowers overall power consumption. Premium 105°C Japanese capacitors and solid state capacitors increase reliability and provide clean DC output with low ripple. Optimized fan speed control and a 120 mm silent fan provide near-inaudible operation during typical use. Flat black cables simplify installation and cable routing in most PC cases.

Suitable for

• Mid-range to high-performance gaming PCs that require a reliable 750 W supply
• Workstations for content creation and multitasking with moderate power demands
• General-purpose desktop builds where non-modular cabling and fixed connectors are acceptable
• Systems using modern multi-core processors, including setups requiring dual CPU power connectors

When it may not be suitable

This non-modular power supply may not be the best choice for compact small-form-factor systems where cable excess could limit space and airflow. Users who prefer fully modular cabling for maximum flexibility and tidier builds may consider a modular or semi-modular alternative. Very high-end multi-GPU systems with extreme peak power demands beyond 750 W will also need a higher-capacity PSU.

Key specifications

• Total power: 750 W continuous output
• Efficiency certification: 80 PLUS Bronze (230V EU, up to approximately 90%+ efficiency)
• Input voltage range: 200–240 V AC, 47–63 Hz
• Cooling: 120 mm silent fan with optimized thermal speed control
• Cabling: Non-modular, flat black cables for easier routing
• Protection & reliability features: Active Power Factor Correction (>0.9), premium 105°C Japanese capacitors, high-end solid state capacitors
• Conversion: DC-to-DC conversion circuit for tight voltage regulation
• Color: Black

How to use

Install the AEROCOOL AEROB750 in a standard ATX-compatible power supply bay, securing it with the supplied screws. Connect the 24-pin motherboard connector, appropriate CPU power connectors (supports dual CPU connectors if required), GPU and peripheral power connectors to the corresponding components. Ensure the PSU fan intake and exhaust have adequate clearance and that cables are routed to avoid obstructing case airflow. Use the system BIOS or monitoring software to verify stable voltages under idle and load conditions after first startup.

What to consider before purchase

• Case size and cable routing: non-modular flat cables require space for excess cables inside the case
• Total system power draw: confirm 750 W is sufficient for peak combined CPU and GPU loads
• Connector availability: verify the PSU has the required number and type of connectors for your components
• Desired efficiency and noise levels compared with modular or higher-rated units

Recommendations

For reliable operation, allow for proper case airflow, avoid obstructing the PSU fan, and periodically check connections. Pair this 750 W unit with single high-performance GPUs or mid-to-high-range GPUs and modern multi-core CPUs. For systems approaching or exceeding sustained 80–90% load, consider a higher-capacity or modular PSU to improve cable management and headroom.