SYNERGY21 LED Flex Strip 3528 - 80 KW DC24V 72W HP IP68

The SYNERGY21 LED Flex Strip 3528 is a high-performance, durable lighting solution designed for both indoor and outdoor applications. With 80 SMD 3528 LEDs per meter, it delivers bright, cool white light at 6000-6500K, perfect for accent lighting, task lighting, or decorative installations. The strip operates on 24V DC and consumes 72W total (14.4W/m), providing a luminous flux of approximately 2800 lm (560 lm/m). Its IP68 rating ensures protection against dust and water immersion, making it suitable for wet environments. The self-adhesive backing allows for easy mounting on clean surfaces, and the strip can be cut every 12.5 cm for custom lengths. Dimmable with a compatible dimmer, this LED strip offers flexibility and energy efficiency with a lifespan of 50,000 hours.

Advantages

High brightness with 80 LEDs/m and 2800 lm total output. IP68 waterproof rating for outdoor and wet area use. Dimmable for adjustable ambiance. Easy installation with self-adhesive backing. Long lifespan of 50,000 hours reduces replacement costs.

Suitable for

• Indoor accent lighting (kitchens, living rooms, bedrooms)
• Outdoor landscape lighting (gardens, patios, pathways)
• Commercial signage and display lighting
• Under-cabinet lighting in kitchens or workshops
• Architectural lighting for coves and niches

Key specifications

• LED Type: SMD 3528
• LED Density: 80 LEDs/m
• Light Color: Cool White
• Color Temperature: 6000-6500K
• Operating Voltage: 24V DC
• Total Power Consumption: 72W
• Power Consumption per Meter: 14.4 W/m
• IP Rating: IP68
• Strip Length: 5 meters
• Strip Width: 10 mm
• Strip Height: 3 mm
• Luminous Flux per Meter: ~560 lm/m
• Total Luminous Flux: ~2800 lm
• Beam Angle: 120°
• Dimmability: Yes (with compatible dimmer)
• CRI: >80 Ra
• Cuttable Interval: Every 12.5 cm
• Lifespan: 50,000 hours
• Mounting: Self-adhesive backing
• Application Environment: Indoor & Outdoor

Recommendations

For optimal performance, use with a compatible 24V DC LED driver and dimmer. Ensure the mounting surface is clean and dry before applying the adhesive backing. When cutting, only cut at marked intervals to avoid damaging the circuit. Suitable for use in damp locations but avoid direct submersion unless properly sealed.