SPECTRUM The Filament PETG Midnight Black 1,75mm 1kg (TF-24015)

3D printing with PETG often means choosing between strength and ease of use. The SPECTRUM The Filament PETG Midnight Black 1.75mm 1kg solves this by combining high strength, good layer adhesion, and low warping in a deep, consistent black.

Who is it for

This filament is for makers and professionals who need durable, impact-resistant parts with a sleek black finish. It works on standard FDM 3D printers with a heated bed.

Main features

• Material: PETG (Polyethylene Terephthalate Glycol)
• Colour: Midnight Black
• Diameter: 1.75 mm with ±0.03 mm tolerance
• Net weight: 1 kg
• Recommended print temperature: 220-250 °C
• Recommended bed temperature: 70-90 °C
• Low warping and good layer adhesion
• Vacuum-sealed with desiccant

Specifications

• Density: 1.27 g/cm³
• Tensile strength: 50 MPa
• Elongation at break: 150%
• Heat deflection temperature (HDT): 70 °C at 0.45 MPa
• Shore hardness: D78
• Odor: Low
• Shrinkage: Low
• UV resistance: Good

Tips

Store the filament in a dry place after opening, as PETG can absorb moisture. Use a heated bed and ensure proper bed adhesion for best results.