Σετ τρυπανιών Bosch 2 607 010 524

The Bosch 2 607 010 524 drill bit set contains five masonry bits with cylindrical shanks, designed for drilling fixings into concrete and natural stone. Sizes range from 4.0 mm to 10.0 mm, and the compact packaging (156.5×69.5×23 mm) makes the set convenient to store and transport. The bits are compatible with corded and cordless rotary and impact drill/drivers that accept cylindrical shanks.

Advantages

Each bit features a 2‑flute U‑shape design that improves dust removal and reduces friction, which helps extend the service life of the drill bits when working in abrasive materials. The set meets the PGM Masonry Drill Bit Association Board test mark requirements for tight tolerances, ensuring accurate hole diameter and a secure hold for fixings. The construction is intended for lasting performance when drilling into concrete and natural stone.

Suitable for

• Drilling holes for fixings in concrete
• Drilling into natural stone and other abrasive masonry
• Use with corded and cordless rotary drills and impact drill/drivers with cylindrical shanks
• General construction and renovation tasks requiring sizes 4.0 mm–10.0 mm

Key specifications

• Brand: Bosch
• MPN: 2 607 010 524 (2607010524)
• EAN: 3165140446082
• Set contents: 5 masonry drill bits, sizes 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, 10.0 mm
• Shank type: cylindrical
• Pack dimensions: 156.5 mm × 69.5 mm × 23 mm
• Suitable tools: rotary drills and impact drill/drivers (corded and cordless) accepting cylindrical shanks

How to use

Secure the appropriate size bit in the drill's chuck, ensuring the cylindrical shank is correctly seated. Use hammer/impact mode when working in concrete or stone, and apply steady pressure without forcing the bit. Drill at suitable speed for the bit size and material, periodically retracting the bit to clear dust. After drilling, clean the hole before inserting fixings to ensure proper anchoring.

Recommendations

For best results in concrete and natural stone, use an impact drill/driver in hammer mode and select the correct bit size for the fixing. Wear appropriate eye and dust protection and follow the drill manufacturer's safety instructions.