Σειριακό καλώδιο Honeywell CBL-420-300-C00 μαύρο 3 m RS-232C AUX

The Honeywell CBL-420-300-C00 is a 3 m (9.8') coiled RS-232C serial cable with 5V signal levels, designed as an auxiliary connection for Honeywell Bioptic Stratos scanners. The cable is black, uses a 10-pin modular connector and supports host power where supported by the specific scanner and Stratos model, providing a reliable wired link for data communication and device integration.

Advantages

This RS-232C AUX cable offers a coiled design for flexible reach and reduced cable clutter, a 10-pin modular connector for secure mating, and a 3 m length that balances mobility and workspace range. Constructed for compatibility with Honeywell Bioptic Stratos Aux interfaces, it uses standard 5V signal levels and can provide host power when the connected devices support that feature.

Suitable for

• Connecting Honeywell Bioptic Stratos scanners to RS-232C host devices
• Serial data transfer in point-of-sale and logistics terminals
• Workstations where a retractable, space-saving cable is preferred

Key specifications

• Model: CBL-420-300-C00
• Length: 3 m (9.8')
• Interface: RS-232C (5V signals)
• Connector: 10-pin modular
• Color: Black
• Design: Coiled
• Compatibility: Honeywell Bioptic Stratos Aux
• Host power: Possible (dependent on scanner and Stratos models)

How to use

Plug the 10-pin modular connector into the AUX port of the Honeywell Bioptic Stratos scanner and connect the other end to the RS-232C host device. Ensure both devices are powered off during connection if required by your hardware guidelines, then power on the host and scanner. Configure the host serial port settings (baud rate, parity, data bits, stop bits) to match the scanner’s serial communication parameters. If host power is needed and supported, verify that the host provides the correct power before enabling it.

Recommendations

Use the coiled cable to minimize workspace clutter and avoid overstretching; inspect connectors for secure seating and check device manuals to confirm whether host power is supported for your specific scanner and Stratos model.