Ψύκτρα M.2 SSD Jonsbo M.2-7 Μαύρο — παθητική ψύκτρα για μονάδες M.2, επίπεδο σχέδιο αλουμινίου

Jonsbo M.2-7 Black is a passive heatsink specifically designed for M.2 SSD modules. Its low-profile aluminum construction attaches directly to the M.2 drive surface to improve heat dispersion, reduce operating temperatures and help maintain sustained performance in desktop and compact PC builds where space is limited or active cooling is impractical.

Advantages

The low-profile aluminum design provides improved thermal conductivity without adding significant height, making it compatible with tight clearances. Being passive, it requires no power, fans or additional mounting points and operates silently while reducing thermal throttling risk. Its direct-contact surface increases heat transfer from the SSD to the ambient airflow available in the chassis.

Suitable for

• Compact desktop systems with limited clearance above the M.2 slot
• Small-form-factor (SFF) and mini-ITX builds where active cooling is not possible
• Workstations and gaming PCs aiming to maintain sustained SSD throughput
• Use cases where silent operation is required and fan noise must be minimized

Key specifications

• Form factor: low-profile M.2 heatsink suitable for single-sided and some double-sided modules depending on clearance
• Material: anodized aluminum body for efficient thermal conduction
• Cooling type: passive heatsink relying on conduction and chassis airflow
• Mounting: direct-attach design compatible with standard M.2 mounting points and adhesive interface for contact
• Finish: black anodized surface for improved durability and heat radiation

How to use

Ensure the M.2 drive is powered down and the system is unplugged before installation. Remove any protective film from the heatsink contact surface if present, align the heatsink with the M.2 module and the motherboard standoff, then secure the module to the M.2 mounting point according to the motherboard instructions. If the product includes thermal tape or adhesive, apply it evenly to the SSD surface before placing the heatsink to ensure good thermal contact. After installation, verify there is sufficient clearance in the chassis and that the SSD is firmly seated.

Recommendations

For best results, combine the passive heatsink with case airflow directed over the M.2 area. Check motherboard clearance for double-sided M.2 modules before installation and avoid overtightening. Clean mating surfaces gently to remove dust or residues to maintain effective thermal contact.