Ψύκτρα CPU Jonsbo CR-3000E Dual-Tower με ανεμιστήρες 120 mm, αερόψυκτρα, TDP-Einstufung

Jonsbo CR-3000E is a dual-tower CPU air cooler with two 120mm fans and multiple heatpipes arranged to transfer heat from the CPU base across stacked aluminium fins. The design targets desktop systems used for gaming, content creation and workstation tasks where higher sustained thermal capacity and quieter fan operation are required. The cooler supports standard CPU socket types common on modern motherboards and is specified to handle the manufacturer-stated TDP rating for effective heat dissipation under load.

Advantages

The dual-tower layout increases fin surface area to improve thermal transfer while keeping a compact footprint relative to larger multi-fan solutions. Two 120mm fans provide a balance between airflow and acoustics, offering steady cooling with reduced noise compared to smaller high-RPM fans. Heatpipes make direct contact with the CPU base to move heat efficiently into the fin stacks, and the overall construction is optimized for compatibility with typical RAM and motherboard component clearances.

Suitable for

• Mid- to high-performance gaming PCs that require sustained cooling under load
• Content creation and rendering systems with multi-threaded CPU workloads
• Workstation builds where reliable air cooling and lower fan noise are desired
• Upgrades from stock coolers to improve thermal headroom and stability

Key specifications

• Cooling format: Dual-tower air cooler with two 120mm fans
• Fan size: 120mm (x2)
• Cooling elements: Multiple heatpipes and aluminium fin stacks
• Performance: Designed to handle the specified TDP rating for desktop CPUs
• Compatibility: Fits standard desktop CPU sockets on ATX and micro-ATX motherboards
• Noise characteristics: Tuned for lower acoustic output compared with smaller fans

How to use

Install the cooler following the supplied mounting instructions for your CPU socket type, ensuring the backplate and mounting brackets are secured and the base plate makes full contact with the CPU heat spreader. Apply a thin, even layer of thermal paste before seating the cooler. Attach both 120mm fans to the towers in the intended push-pull orientation if provided, and connect fan power to the appropriate CPU fan or pump header on the motherboard. Verify BIOS fan control settings and monitor temperatures during initial boot and under load to confirm correct operation.

Recommendations

For optimal results, pair the cooler with a motherboard layout that leaves sufficient clearance for memory modules and tall VRM heatsinks. Use PWM fan control to balance cooling performance and noise, and periodically clean dust from the fin stacks and fan blades to maintain thermal efficiency. Confirm TDP compatibility with your CPU model to ensure long-term stability.