Νήμα 3D εκτύπωσης Flashforge PA 1,75 mm μαύρο 1 kg

Flashforge PA 1.75 mm Black is a polyamide (Nylon, PA) filament formulated for FDM/FFF 3D printers that accept PA materials. Supplied in a 1 kg spool with a 1.75 mm diameter, this black filament is intended for printing functional parts that require improved toughness, wear resistance and fatigue performance compared with common thermoplastics. The material exhibits the mechanical properties typical of nylon-based filaments and is best used where strength and durability are priorities. Store the filament in a dry environment to preserve printability and mechanical characteristics.

Advantages

Flashforge PA delivers higher tensile strength and abrasion resistance compared with many standard filaments, offering improved performance for load-bearing or moving components. The filament’s black color provides consistent aesthetic results for visible parts while its chemical structure makes it more resistant to impacts and repetitive stress. When printed with appropriate settings and environmental control, it yields parts with good layer adhesion and dimensional stability for many engineering applications.

Suitable for

• Functional prototypes and end-use mechanical parts
• Gears, bushings and wear-prone components
• Jigs, fixtures and tooling aids requiring durability
• Parts exposed to friction or moderate mechanical loads

Key specifications

• Material: Polyamide (Nylon, PA)
• Diameter: 1.75 mm
• Net weight: 1 kg
• Color: Black
• Compatibility: FDM / FFF printers supporting PA filaments
• Properties: High toughness, good wear resistance, improved fatigue strength

How to use

Load the filament onto a compatible FDM/FFF printer equipped to handle nylon: a heated bed and an all-metal hotend are recommended. Dry the spool before printing if it has been exposed to humidity; common drying settings are 70–80 °C for several hours depending on the filament’s storage history. Use elevated nozzle temperatures and a heated build surface to promote adhesion and reduce warping; consult your printer’s material profiles to determine the optimal temperature range. Print slower than with PLA to allow proper extrusion and interlayer bonding, and consider using an enclosure for more consistent results.

Recommendations

Maintain the filament in a sealed, low-humidity environment with desiccant when not in use. Adjust printing temperatures, bed adhesion methods and cooling fan settings on a per-printer basis and run test prints to fine-tune dimensional accuracy and surface finish. For parts requiring chemical resistance or extreme mechanical loads, validate material performance under expected service conditions before long-term use.