NetApp HDD X422A-R5-RFB, 600 GB, 10.000 σ.α.λ., 6 Gbit/s SAS

The NetApp HDD X422A-R5-RFB is a 600GB, 10,000 RPM hard disk drive with a 6Gbps SAS interface designed for enterprise storage environments. This NetApp branded HDD provides a balance of capacity and performance for systems that require predictable I/O and consistent throughput. The drive is intended for use in NetApp storage arrays and compatible servers where a 6Gb SAS connection and 2.5/3.5-inch form factor bays (vendor-specific) are supported.

Advantages

The 10K RPM spindle speed and 6Gbps SAS interface deliver reduced latency and higher sustained transfer rates compared with lower-speed drives. At 600GB capacity, the drive supports dense storage configurations while maintaining performance for mixed read/write workloads. As an OEM NetApp part (MPN X422A-R5-RFB, EAN 5712505503119), it is manufactured and validated for compatibility in supported NetApp systems, helping simplify deployment and maintenance.

Suitable for

• Enterprise storage arrays and disk shelves in data centers
• Database servers requiring consistent random I/O performance
• Virtualized environments with mixed workload profiles
• Backup and archival tiers where moderate capacity and higher IOPS are needed

Key specifications

• Brand: NETAPP
• Model / MPN: X422A-R5-RFB
• EAN: 5712505503119
• Capacity: 600GB
• Rotational speed: 10,000 RPM
• Interface: 6Gbps SAS
• Category: HDD

How to use

Install the NetApp HDD X422A-R5-RFB into a compatible NetApp drive bay or server chassis following the vendor’s hardware installation procedures. Ensure the system is powered down or that hot-swap procedures are observed if supported. After physical installation, verify the drive is recognized by the host controller or storage OS and perform any required initialization, firmware updates, or RAID configuration according to the storage array’s documentation.

Recommendations

Use this 600GB 10K 6Gb SAS drive in tiers where a balance between capacity and performance is required. Monitor drive health with the storage system’s diagnostic tools, keep firmware current, and follow NetApp compatibility guides to ensure reliable operation.