Μονάδα Ajax MultiTransmitter AJAX-MULTITB μαύρη – ασύρματη διεπαφή συσκευών

Description: MultiTransmitter Module for connecting a wired alarm to Ajax and managing security via a mobile application. A second life for a wired alarm We understand how hard it is to decide to replace your wired alarm. This is a common situation where the system is still able to protect the property, but is already outdated. Renovation with Ajax does not force you to give up your equipment, but gives you the chance to create a modern, comprehensive system based on wired devices. Security via smartphone With MultiTransmitter, users have control over security through a mobile application, receive full notification data and can apply automation scenarios. The installer can configure the system or device in the PRO app on site or remotely. More Ajax features Perimeter infrared sensors, home gas sensors, thermostats, float sensors and other devices extend the functionality of Ajax. Just connect them to the hub via MultiTransmitter and manage the alarm system in the Ajax mobile application. Less hassle with automation Use automation scenarios that allow the alarm system to immediately respond to threats without the need for the police to arrive. Ajax will arm itself according to the schedule, turn on the light after detecting an alarm by the motion sensor, turn off the potential source of ignition at the first sign of fire. With MultiTransmitter, the old alarm system becomes part of a safe, smart home. Full data alarms Using the MultiTransmitter, you can specify the device name, alarm type and room for each wired device. Thanks to this, notifications are more accurate and you know what happened and when. This information is communicated via push notifications and SMS messages, and also communicated to the security agency's alarm monitoring station via the appropriate code. There are a total of 9 types of alarms available: Burglary, Fire, Medical, Pushbutton, Gas, Leak, Tamper, Fault, Custom (Service Event). Reliable radio communication MutliTransmitter communicates with the hub via Jeweller's encrypted radio protocol. It is a TDMA technology developed by Ajax Systems for uninterrupted communication with devices. Jeweller detects jamming attempts, switches to a backup frequency in case of interference, and allows Ajax wireless devices to run on batteries for many years. Security without barriers Using radio signal range doublers, the Ajax alarm system can operate in an area of up to 35 km. However, if a room does not reach radio waves, connecting wired devices via MultiTransmitter is the best solution. The length of the cables can reach up to 400 m. Tamper protection The MultiTransmiter will immediately inform the user if the connection to the device is interrupted by a short circuit, disconnection of the signal cable or an alarm after detecting tampering. Power loss will not be a problem - the backup battery can work for up to 4 days. The MultiTransmiter housing itself is equipped with two elements that react to detaching the integration module from the surface and removing the cover. Instant detection of loss of connection to a wired device (EOL) Free space in the housing for a 7 Ah backup battery 2 elements detect disassembly and opening of the housing From professionals for professionals We have made every effort to ensure that the installation and configuration process does not require time and effort. As with other Ajax devices, the MultiTransmitter connects to the hub in the mobile app after scanning a QR code. When connecting wired devices, you do not need to know the resistance values of the resistors. The system will also notify you when the device is connected incorrectly. | Management, monitoring, configuration: Jeweler communication technology: Two-way communication Advanced anti-sabotage Dynamic-key block encryption Instant notifications Remote configuration via Ajax application | Security: Tamper protection with integration module authentication Detection of loss of connectivity within 36 seconds Immediate detection of wired connection loss, short circuits and failures when using EOL/2EOL/3EOL connection | Special functions: 9 types of alarms for each wired zone: Burglary Fire Medical assistance Emergency button gas alarm Tamper protection Malfunction Flooding Own | Environment requirements: Permissible operating temperature: from -10°C to +40°C Permissible humidity: up to 75% | Power supply: MultiTransmitter power supply: 100-240 V~, 50/60 Hz MultiTransmitter backup power supply: 12 V, up to 7 Ah capacity with a full charge cycle of up to 30 hours Power for connected devices: 10.5-15 V, up to 1 A (total maximum current consumption) | Color: Black | Accessories included: MultiTransmitter motherboard Case Power cord 12V battery connection cable Installation kit Short instruction | Dimensions: 192 x 238 x 100 mm | Weight: 805 | Compatible with: All Ajax hubs All Ajax radio signal range doublers

How to use

Install the MultiTransmitter board in the enclosure and connect the module to the Ajax hub by scanning the QR code in the Ajax app. Wire the existing detectors to the specified alarm/tamper zone inputs and connect the main and backup power sources according to the user guide. Configure each wired device in the app: assign a device type and room to enable detailed notifications and correct reporting to monitoring stations. If using MotionCam, connect it to enable photo verification on motion-triggered alarms when the system is armed.

Recommendations

Place the hub and range extenders to ensure reliable radio communication with the MultiTransmitter; verify detector wiring with the app’s automatic checks; use the app to assign alarm types and locations for clearer notifications and to enable monitoring station codes as required.