MakerBot Specialty PETG νήμα 1.75 mm μαύρο 750 g

The MakerBot Specialty PETG Filament combines the ease of use of PLA with the durability and strength of ABS. This 1.75 mm diameter filament is engineered for reliable printing on a wide range of FDM 3D printers, including the MakerBot Method and Replicator+ series. With a net weight of 750 g, it offers excellent value for functional prototypes, mechanical parts, and end-use components.

Advantages

PETG (Polyethylene Terephthalate Glycol) is known for its high strength, good layer adhesion, and impact resistance. It exhibits low warp, making it ideal for large prints, and offers chemical resistance suitable for outdoor applications. The filament is vacuum-sealed with desiccant to ensure optimal moisture protection.

Suitable for

• Functional prototypes and mechanical parts
• Jigs, fixtures, and enclosures
• Outdoor applications requiring UV and chemical resistance
• Educational and professional 3D printing

Key specifications

• Material: PETG (Polyethylene Terephthalate Glycol)
• Filament Diameter: 1.75 mm ±0.02 mm
• Net Weight: 750 g (0.75 kg)
• Colour: Black
• Recommended Print Temperature: 230-250 °C
• Recommended Build Plate Temperature: 70-80 °C (Heated Bed Required)
• Spool Type: Plastic Spool
• Density: 1.27 g/cm³
• Tensile Strength: Approx. 50 MPa
• Elongation at Break: Approx. 200%
• Heat Deflection Temperature (HDT): Approx. 70 °C (at 0.45 MPa)
• Shore Hardness: Approx. D75

Recommendations

For best results, store the filament in a dry environment and use a heated build plate. Compatible with most FDM printers that accept 1.75 mm filament. Ensure the print temperature is within the recommended range for optimal layer adhesion.