Ντουλάπα τοίχου LOGON RWP07U45BL 7U μαύρο κλειδαριά ασφαλείας

The LOGON RWP07U45BL is a 7U wall-mounted rack cabinet in black with a key lock for secure storage of networking devices. It has a tempered 4 mm antistatic glass door with smoothed edges set in an extruded aluminum frame and colored side strips for a decorative appearance. The cabinet is suitable for installations where a compact, secure enclosure is required and supports both passive and optional active ventilation.

Advantages

The cabinet combines a tempered, antistatic glass front door and an extruded aluminum frame for increased fracture resistance and a neat finish. Its detachable side doors and preinstalled device installation rails (one set with two rails) allow flexible equipment mounting and depth adjustment. Cable inlet openings at the top, bottom and rear (145 x 70 mm) provide three-direction cable entry, and a movable rubber-edged cable entry module with sliding compression (0–50 mm) secures incoming cables and reduces dust ingress. Optional pinion feet or casters enable use as a free-standing unit, and an optional ventilation module with up to two fans can be fitted to the top chassis for active ventilation; without the fan module the top vents enable passive air circulation.

Suitable for

• Wall-mounted installation of 19" network equipment up to 7U
• Small server rooms, communication closets and office network points
• Secure storage of switches, patch panels, routers and small servers

Key specifications

• Rack capacity: 7U
• 19" standard
• Dimensions (H x D x W): 423 mm x 450 mm x 600 mm
• Weight: 17 kg
• Front door: 4 mm tempered antistatic glass with extruded aluminum frame
• Lock: key lock
• Color: Black
• Cable entries: 145 x 70 mm at top, bottom and rear; rubber-edged movable entry 0–50 mm
• Ventilation: passive via top vents; optional active module with up to 2 fans

How to use

Mount the cabinet on a suitable wall using appropriate fixings for the wall material and load. Install devices on the pre-mounted installation rails and adjust rail depth as required. Feed cables through the top, bottom or rear 145 x 70 mm inlets and compress them using the rubber-edged cable entry module to secure and seal the cable bundle. If active ventilation is required, install the optional fan module on the top chassis; otherwise rely on the passive ventilation holes. Detach side doors when additional access is needed. Lock the front door with the key to secure equipment.

Recommendations

Use appropriate wall anchors and ensure the total mounted equipment weight does not exceed the cabinet and wall capacity. Route power and network cables separately where possible and maintain clearance for airflow if active cooling is not installed.