Καλώδιο τροφοδοσίας Kolink England Type G σε C13 1,2 m (KKTP012UK)

Power Cable Kolink England Type G to C13 1.2 m (KKTP012UK) is a mains lead designed to connect equipment with a standard IEC C14 inlet to United Kingdom Type G wall sockets. With a 1.2 metre length and a C13 connector, this cable is intended for use with computer power supplies, monitors, printers, UPS units and other devices that accept the IEC C13 plug. The cable provides the required three-pin connection on the UK side and a secure IEC C13 on the equipment side for reliable mains power delivery.

Advantages

The Kolink cable offers a compact 1.2 m length suitable for typical desk- and rack-mounted setups, reducing excess cable clutter while maintaining reach to nearby outlets. The Type G plug includes the standard UK earth pin for safety, and the IEC C13 connector is compatible with a wide range of IT and consumer devices. Constructed to industry-standard form factors, the lead supports straightforward replacement or installation without adapterries or modifications.

Suitable for

• Desktop PCs and workstations with PSU C14 inlet
• Monitors and displays using IEC C13
• Uninterruptible Power Supplies (UPS) with C14 outlets
• Printers, scanners and office equipment that accept C13
• Powering audio/video equipment with IEC C13 in UK installations

Key specifications

• Cable type: IEC C13 to UK Type G mains plug
• Length: 1.2 metres
• Conductors: three-core (live, neutral, earth)
• Connector orientation: straight IEC C13 on appliance side
• Intended voltage: mains voltage compatible with UK supply

How to use

Connect the IEC C13 end of the cable to the appliance's C14 inlet and insert the UK Type G plug into a compatible mains socket. Ensure the appliance is switched off before connecting or disconnecting the cable. Route the cable to avoid sharp edges and pinch points, and do not place heavy objects on the lead. Check that connections are fully seated for firm contact before powering the device.

Recommendations

Use this cable indoors only and ensure it is rated for the local mains voltage and current of the connected device. Replace the cable if the insulation, plug or connector shows visible damage. For permanent or critical installations, verify compatibility with device manufacturer specifications and any applicable electrical codes.