Καλώδιο DisplayPort DELTACO DP-1020D-FLEX 2 m, DisplayPort σε DisplayPort, αρσενικό–αρσενικό, μαύρο

Deltaco DP-1020D-FLEX is a 2 m DisplayPort-to-DisplayPort cable designed for flexible routing and straightforward installation. The cable is soft and pliable, with black jacket finish, and supports DisplayPort 1.4 for high-resolution video connections between compatible devices.

Advantages

The cable’s flexible construction makes it easy to bend and route in tight spaces without stressing connectors. Support for DisplayPort 1.4 enables transmission of high-resolution signals up to 7680 x 4320 at 30 Hz, suitable for many modern monitors and graphics sources. The standard DisplayPort straight male connectors on both ends ensure broad compatibility with DisplayPort inputs and outputs.

Suitable for

• Connecting a PC or laptop to a DisplayPort monitor
• Use with docking stations or graphics cards that provide DisplayPort outputs
• Routing in setups where a flexible cable is needed to avoid strain

When it may not be suitable

This cable supports up to 7680 x 4320 at 30 Hz; it may not meet requirements where higher refresh rates at the same resolution are needed (for example 60 Hz at 8K). It also uses straight male DisplayPort connectors on both ends and therefore is not suitable if a right-angle connector or an adapter is required for a specific device.

Key specifications

• Length: 2 m
• Connector type: DisplayPort straight male — both ends
• DisplayPort version: 1.4
• Maximum supported resolution: 7680 x 4320 pixels at 30 Hz
• Colour: Black
• Cable weight (approx.): 110 g

How to use

Ensure both devices are powered off or in a low-power state before connecting. Insert each DisplayPort male connector firmly into the DisplayPort input/output on your devices until the latch engages. Power on the devices and configure the display settings on your source device to the desired resolution and refresh rate supported by your monitor. Route the cable avoiding sharp bends and pinch points to preserve longevity.

What to consider before purchase

• Confirm your monitor and graphics source both have DisplayPort inputs/outputs
• Verify required resolution and refresh rate (this cable supports up to 8K at 30 Hz)
• Check whether a right-angle connector or a different cable length is needed for your setup

Recommendations

For best results, use with devices that support DisplayPort 1.4 and select the highest compatible resolution and refresh rate in your system display settings. Avoid tight bends near connectors and do not pull on the cable jacket when disconnecting; grip the connector body instead.