HDD DELL 500 GB 2.5 ίντσες Serial ATA III XGR4J

The DELL XGR4J internal 2.5" hard drive provides 500 GB of storage capacity with a 7,200 RPM rotational speed and a Serial ATA III (SATA) interface. Its compact 2.5" form factor makes it suitable for many laptops and small desktop systems where increased storage and faster disk access are required.

Advantages

This Dell HDD combines a 500 GB capacity with a 7,200 RPM spindle speed to deliver quicker read/write access compared with lower-speed drives. The SATA III interface supports improved data transfer rates when connected to compatible controllers, and the 2.5" form factor allows installation in a variety of laptops and compact desktop enclosures.

Suitable for

• Upgrading laptop storage
• Increasing capacity in small form-factor desktops
• Secondary internal storage for backups or media libraries

Key specifications

• Brand: Dell
• Model / MPN: XGR4J
• Capacity: 500 GB
• Form factor: 2.5"
• Interface: Serial ATA III (SATA)
• Rotational speed: 7,200 RPM
• EAN: 5711783193944

How to use

Power off the computer and disconnect it from mains. Open the laptop or desktop chassis according to the manufacturer’s instructions, locate the 2.5" drive bay or adapter, and secure the HDD using the appropriate screws or caddy. Connect the SATA data cable to the drive and to the motherboard, and attach the power connector. Close the chassis, power on the system, and initialize or format the drive in the operating system if required.

Recommendations

Verify that your device supports a 2.5" SATA III drive and that you have the correct mounting brackets or caddy. For best performance, connect the drive to a SATA III port and ensure system firmware and drivers are up to date.