Bosch 2 608 900 012 Εξάρτημα πολυεργαλείου Λεπίδα βυθιζόμενης κοπής

The Bosch 2 608 900 012 plunge cut blade (EXPERT MetalMax) is a carbide-tipped blade for oscillating multitools, engineered for precise flush and plunge cuts in hardened steel and stainless steel. With a 20 mm cutting width and durable construction, it is suitable for applications where corrosion-resistant or hardened fasteners, rebar and other tough metal materials need trimming or removal. The blade is supplied as a single piece and is intended for professional and DIY use where long life and reliable cutting in metal are required.

Advantages

The EXPERT MetalMax blade provides a clean, flat flush cut in hardened metals thanks to its carbide cutting edge and robust design. Its longevity reduces the need for frequent blade changes when working with abrasive or high-hardness materials. The 20 mm width offers controlled cutting for precise plunge and surface-level work on screws, rebar and sheet metal.

Suitable for

• Cutting off hardened screws and bolts flush with surfaces
• Trimming rebar and small-diameter reinforcement
• Plunge cuts in stainless steel and steel sheets
• Removing rusted or seized fasteners with an oscillating multitool

Key specifications

• Brand: Bosch
• Model / MPN: 2 608 900 012 (2608900012)
• Blade type: Carbide-tipped plunge cut blade (EXPERT MetalMax)
• Cutting width: 20 mm
• Material suitability: Hardened steel, stainless steel, rebar
• Quantity: 1 piece
• EAN: 4059952530642

How to use

Install the Bosch EXPERT MetalMax blade into a compatible oscillating multitool according to the tool manufacturer’s instructions. Secure the workpiece and mark the cut. Operate the multitool at the recommended speed for metal cutting, applying steady, moderate pressure and allowing the carbide edge to do the cutting. For flush cuts on fasteners, position the blade flat against the surface and make short controlled passes until the fastener is cut through. Replace the blade when cutting performance decreases or if damage is visible.

Recommendations

Use appropriate personal protective equipment (safety glasses, gloves and hearing protection) and clamp the workpiece securely. Keep coolant or compressed air available to clear metal dust if required. Follow the multitool and blade manufacturer guidelines for maximum speed and recommended applications to extend blade life.