ARCTIC Freezer 50 με A-RGB-Ελεγκτής – Ψύκτρα CPU Dual-Tower Multi-συμβατή με A-RGB

RAM Clearance

Since the Freezer 50 is built for maximum performance, including a massive heatsink, it does not have limitless RAM Clearance. Recommended is a maximum memory module height of 37.5 mm. This stipulation is mainly due to the tip on the underside of the Freezer 50, which means modules that exceed this height could still be compatible if they have V-shaped or centrally recessed heatsinks.

A-RGB for Full Colour Control

The 13 A-RGB LEDs installed in the Freezer 50 are autonomously controllable. The Freezer 50 is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB mainboard connection or via an external controller and synchronized with the lighting of other hardware.

Dual Tower Design and 6 Heatpipes

The massive, asymmetrical twin-tower CPU cooler offers more cooling surface and, together with its six U-shaped Direct-Touch Heatpipes, ensures better heat distribution and faster heat dissipation.This enables the highest possible cooling performance and makes the Freezer 50 to one of the strongest air cooler ARCTIC ever made.

Ideal airflow

The Freezer 50 features two P-fans working in push-pull-configuration. Combining a 120 mm and a 140 mm fan leads to an increase in airflow for improved cooling, while keeping the noise level and the installation height down.

P-fan for Increased Performance

The Freezer 50 benefits of all advantages of our P-fans:* High static pressure for increased cooling performance* Broad RPM range* Lower power consumption* Less vibrations* Extended life span* High quality bearing* PWM for synchronous fan control

Full Fledged A-RGB Controller (Optional)

ARCTIC's own A-RGB Controller lets you enjoy exciting RGB lighting, even if your motherboard has no A-RGB connector.The controller can be freely placed in the case and with the included remote control you then have full control over the effect and colour design.* The A-RGB controller is optional. If you want to purchase the Freezer 50 with A-RGB controller, make sure you choose the version "Freezer 50 incl. A-RGB Controller". Further information about the controller can be found here.

Easy Installation & Secure Hold

With our new improved mounting solution, installing the the Freezer 50 is quick and easy.

How to use

Install the ARCTIC Freezer 50 onto a compatible motherboard following the supplied mounting instructions for your CPU socket. Connect the fans to the appropriate headers or to the included A-RGB controller, and attach the controller to a 12 V power source if required. Adjust fan curves in BIOS or using motherboard software, or control lighting via the A-RGB controller. Ensure adequate case airflow and clearance for the cooler dimensions before installation.

Recommendations

For optimal performance, pair the cooler with a case that provides good front-to-back airflow, configure a conservative fan curve for typical use to keep noise around 0.4 sone, and verify RAM and motherboard clearance relative to the cooler dimensions. Use the A-RGB controller to manage lighting if your motherboard lacks an addressable RGB header.