Αντάπτορας Barrow G1/4 αρσενικό σε G1/4 αρσενικό 10 mm λευκό TB2D-02 w

Barrow TB2D-02 w is a compact G1/4" AG to G1/4" AG adapter with a white finish and a 10 mm overall length. Designed for liquid cooling systems and other threaded fluid assemblies, this adapter joins two G1/4" threaded components while keeping a small profile to suit tight routing and confined spaces. The simple, straight coupling maintains thread compatibility and helps adapt connections or replace fittings without modifying existing hardware.

Advantages

The adapter provides a straightforward mechanical connection between two G1/4" threads in a compact 10 mm form factor, minimizing added bulk in a cooling loop. Its white finish offers a neutral aesthetic that integrates with light or themed builds. The precision threads ensure reliable sealing when used with appropriate seals or tape, and the short length reduces the need for angled fittings in constrained layouts.

Suitable for

• Connecting two G1/4" threaded components in PC water-cooling loops
• Replacing or extending fittings where space is limited
• Adapting between inline components such as reservoirs, pumps, and radiators
• Small fluid systems or custom liquid setups with G1/4" ports

Key specifications

• Thread type: G1/4" male to G1/4" male
• Length: 10 mm total
• Finish: white
• Application: liquid cooling and compatible fluid systems
• Compatibility: standard G1/4" fittings and ports

How to use

Ensure both mating ports are clean and free of debris before installation. Apply appropriate thread sealant, tape, or O-rings as required by the system design and sealing method. Hand-start the adapter into the first G1/4" port to avoid cross-threading, then tighten to the required torque using suitable tools or fittings—do not overtighten. Align the second component and engage the opposite thread until secure. Check the system for leaks after filling and pressurizing, and retighten if necessary following the manufacturer’s guidance for your cooling components.

Recommendations

Use this short adapter where minimal added length is desired; pair with compatible seals and inspect threads regularly. For assemblies requiring angled routing, consider angled fittings instead of a straight adapter to reduce stress on tubing and ports.