All-in-One Υδρόψυξη Sharkoon S80 RGB

The Sharkoon S80 RGB all-in-one liquid cooler provides a compact, ready-to-install cooling solution for desktop CPUs. It combines a 120 mm radiator fan with PWM control and RGB lighting to balance thermal performance and system aesthetics. The unit supports a wide range of processor sockets and is finished in a matte black colour that integrates easily into most PC builds.

Advantages

The cooler offers adjustable fan speed from 600 to 2000 RPM, enabling a range from quiet operation to higher airflow when thermal load increases. With an airflow rating of 131.93 m³/h and a maximum static pressure of 2.9 mmH2O, the pump-and-fan assembly is designed to move air effectively through the radiator fins for improved heat dissipation. The all-in-one design simplifies installation compared with custom loop systems and reduces the need for separate maintenance.

Suitable for

• Cooling mainstream and high-performance desktop CPUs in gaming and productivity systems
• Small- to mid-tower PC builds where a single 120 mm radiator is preferred
• Systems requiring both thermal control and subtle RGB lighting

Key specifications

• Type: All-in-one liquid cooler
• Fan diameter: 120 mm
• Fan speed: 600–2000 RPM (PWM adjustable)
• Airflow: 131.93 m³/h
• Maximum air pressure: 2.9 mmH2O
• Colour: Black
• Weight: 1.48 kg
• Supported sockets: Broad compatibility with modern and legacy desktop CPU sockets

How to use

Mount the radiator and fan into an available 120 mm slot in your case following the motherboard and case manufacturer guidelines. Attach the pump block onto the CPU with the provided mounting brackets appropriate for your processor socket and tighten to the specified torque to ensure reliable contact. Connect the fan and pump power cables to the corresponding headers on the motherboard or to a fan controller to enable PWM speed control and RGB lighting management. Verify proper cooler seating and cable routing before powering on the system.

Recommendations

For optimal results, use the Sharkoon S80 RGB in cases with good front or top ventilation to ensure unobstructed airflow through the radiator. Configure PWM curves in the BIOS or with motherboard software to balance noise and cooling according to workload. Periodically inspect mounts and cable connections during routine system maintenance to ensure continued performance.